J-Serisi

0216 326 45 35 mtg@megatr.com

J-Serisi

	System Model		EM2305	EM2405	EM2505	EM2506	EM2605 **
System Specifications	Frequency Range(Hz)		0-3000	0-2400	0-2200	0-2200	0-2600*4
	Rated Force	Sine(kN)	16	24	35	40	54
		Random (kN rms)*1	16	24	35	40	54
		Shock(kN)	40	55	70	80	108
		High Velocity Shock (kN)	30	48	68	77	96
	Maximum Acc.	Sine(m/s2)	941	923	777	888	857
		Random (m/s2 rms)	658	646	544	622	600
		Shock (m/s2 peak)	2352	2115	1555	1777	1714
		High Velocity Shock (m/s2 peak)	1764	1846	1511	1711	1523
	Maximum Vel.	Sine(m/s)	2.4	2.4	2.4	2.4	2.4
		Shock (m/s peak)	2.4	2.4	2.4	2.4	2.4
		High Velocity Shock (m/s peak)	3.5	3.5	3.5	3.5	3.5
	Maximum Dsp.	Sine (mmp-p)	100	100	100	100	100
		Maximum Travel  (mmp-p)	120	120	120	120	116
	Maximum Load(kg)		300	400	600	600	1000
	Power Requirements (kVA) *2		28	38	53	57	86
	Breaker Capacity* (A) *3		100	150	200	200	300
Vibration Generator	Model		J230	J240	J250	J250	J260
	Armature Mass(kg)		17	26	45	45	63
	Armature Diameter (φmm)		200	290	440	440	446
	Allowable Eccentric Moment(N･m)		700	850	1550	1550	1550
	Dimensions(mm) W×H×D		1124x 1079x  850	1234x 1145x  890	1463x 1301x  1100	1463x 1301x  1100	1527x 1319x  1100
	Shaker Body Diameter(mm)		630	720	860	860	920
	Mass(kg)		1800	2400	3500	3500	4100
Power Amplifier	Model		SA3M- J30EM	SA4M- J40EM	SA5M- J50EM	SA6M- J50EM	SA7M- J60EM
	Maximum Output(kVA)		23	34	50	57	70
	Dimensions(mm) W×H×D		580x 1750x 850	580x 1750x 850	580x 2100x 850	580x 2100x 850	1160x 1950x 850
	Mass(kg)		380	490	930	960	1400
Controller	Vibration Controller		See Vibration Controller K2
Cooling	Cooling Method		Air cooling
	Blower	Dimensions (mm)  W×H×D *5	708x 1421x 782	707x 1531x 917	1294x 2123x 838	1294x 2123x 838	1298x 2244x 798
		Mass(kg)	140	215	292	292	305
		Wattage(kw)	3.7	5.5	11	11	15
		Duct Hose Diameter(φ)	200	200	250	250	250

• *1 Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.
• *2 Power supply: 3-phase 200/220/380/400/415V, 50/60 Hz. A transformer is required for other supply voltages.
• *3 In case of 200 V
• *4 Above 2000 Hz, the force rolls-of f at a rate of -12 dB/oct.
• *5 Spec described above is in case of 60Hz. Dimension is changed in case of 50Hz.

• * The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70% must be applied. Continuous use at maximum levels may cause failure.
• * In the case of Random vibration test, please set the test definition of the peak value of acceleration waveform to be operated less than the maximum acceleration of Shock.
• * Frequency range values vary according to sensor and vibration controller.
• * Mass and dimensions may change for CE-marked systems.
• ** E/L is required for exporting the shaker system of over 50 kN Sine force.